2,500T VersaCrane™ TC-36000 Series 1

The VersaCrane™ line stands tall as a true technological marvel in the crane and rigging world. It was designed specifically to work in petrochemical facilities and other areas with restricted space.


The 2,500-ton VersaCrane™ TC-36000 Series1 is one of the largest pedestal cranes in the world. Its 240' mast can be positioned at several different super-lift radii. The maximum main boom is 450'; however, a jib can be added to increase tip weight. When in its maximum lifting configuration, the TC-36000 uses 2800 Kips of super-weight counterweight.


  • Industry leading ground bearing pressures: These cranes can maintain high capacity while fitting in confined spaces and providing industry-leading low ground bearing pressures. VersaCranes™ use steel distribution beams to spread outrigger loads over a greater area. In most cases, this allows VersaCranes™ to maintain a ground bearing pressure below 2,500 PSF.
  • Performs well in confined areas: These cranes work efficiently in confined areas. The VersaCrane™ line has a unique ability to safely build over pipe racks and other obstacles. The hinge counterweight system gives the crane more capacity without substantially increasing the tail swing radius. The counterweights act as a second main counterweight tray, allowing the crane, once at an appropriate radius, to disconnect the super-lift counterweights and swing the minimum tail swing radius without losing load capacity.
  • Can be transported via SPMT: Using Deep South's years of heavy transportation experience, the VersaCrane™ line can be relocated using SPMTs, saving time and money on mobilization costs.
  • Can be customized for your project: Our intricate knowledge of these cranes allows us to make job-specific crane modifications based on the needs of the job. This allows Deep South to reduce tail swing radii or create new configurations based on the specific needs of your job site.

All VersaCrane™ components are engineered and manufactured at our Baton Rouge facility by a team of certified engineers and experienced craftsman.

When you need power, the mammoth TC-36000 Series 1 is the right tool for the job.

Request Information

2,500T VersaCrane TC-36000 Series 1
2500T VersaCrane TC-36000/S1 2
2,500T VersaCrane TC-36000/S1 3
2,500T VersaCrane TC-36000/S2 4

Related Projects

Deep South Heavy Transportation Obstacles

Overcoming Obstacles: 800-mile Turnkey Challenge with Notable Jack and Slide

View Project
Overcoming Obstacles: 800-mile Turnkey Challenge with Notable Jack and Slide

Using its nationwide resources, Deep South transported a reactor and third stage separator from Oklahoma to Ohio and then to its final destination in the refinery using a combination of barging, over-the-road transportation, jack and slide operations, and heavy lifting.

Deep South Crane Rigging Services

Coker Derrick Structure Installation

View Project
Coker Derrick Structure Installation

Deep South hoisted and set the four sections of the coker derrick structure, the heaviest of which weighed 256 tons, and two 450-ton coke drums at a Midwest Refinery using our 2,500-ton VersaCrane TC-36000 and our 275-ton Demag CC-1400.

420 Ton Heavy Lift Crane

420T Vessel VersaCrane™ Lift

View Project
420T Vessel VersaCrane™ Lift

Using our powerful 2,500-ton VersaCrane TC-36000 with 450’ main boom and a 260’ radius, Deep South successfully removed and replaced these vessels, the largest of which was 420 tons.

A successful job is built on precise planning and safe execution. request a quote

Thanks for Your Interest!

To gain access to our equipment details, please provide us with some basic information: