Norco Flare Stack Lift
Deep South Crane and Rigging was contracted for a heavy lift project in Norco, Louisiana. The scope of work required for this lift included lifting two sections of a flare stack and the flare tip. To perform these three lifts totaling nearly 300’, Deep South used the 1,320-ton Demag AC-1000 and the 500-ton Liebherr LTM 1400-71, which served as the tail crane.
The first section of the flare stack weighed 239,000 pounds and measured 135’ long. The second section weighed 114,000 pounds and measured 150’ long. The third and final lift of the flare tip weighed 15,000 pounds and measured 12’ long.
One of the key challenges involved in this lift was providing cranes that were both capable of performing these lifts and could be set up with very little space while negotiating a single entrance and exit point. The 1,320 Demag AC-1000 and the 500-ton Liebherr LTM 1400-71 tail crane were able to meet these demands while safely and successfully completing the lifts.
Equipment Used
Services Used
By the Numbers
- First Section of Flare Stack: 239,000 lbs., 135' long
- Second Section of Flare Stack: 114,000 lbs., 150' long
- Flare Tip: 15,000 lbs., 12' long
Related Projects
A Flare for Efficiency
View Project
A Flare for Efficiency
Routine maintenance plant turnarounds are typically anything but straightforward—as a turnaround in the Southeast quickly demonstrated. The effort called for the removal and replacement of three exchangers, as well as a flare modular replacement. The size and location of the exchangers, the tight window for replacement of the flare, and localized high working-wind speeds were a few of the top challenges that the Deep South team were tasked to overcome.
Southeast Petrochemical Turnaround
View Project
Southeast Petrochemical Turnaround
Supplying all cranes in two units during a petrochemical turnaround in the Southeast, Deep South supported the change out of old components and reinstallation of new components with 19 cranes working throughout the project.
92-line Offshore Platform Specialty Transport
View Project
92-line Offshore Platform Specialty Transport
Using 92 lines of Scheuerle SPMTs with 3 power pack units, Deep South successfully assisted the client in moving this offshore platform in Texas.